How To Remove Butyl Tape Easily And Effectively

The good news is that butyl tape is an extremely flexible and effective adhesive. The bad news is that it can seem tricky to remove. 

How To Clean Off Butyl Tape Effectively
The key to cleaning off butyl tape is a little time, the right tools, and a little elbow grease. 

What Is Butyl Tape And How Is It Used?
Butyl tape, made from a rubber-like compound, possesses waterproof and corrosion-resistant properties. A butyl rubber compound is formed from the combination of isobutylene and isoprene. There are four types of butyl adhesives:

single-sided tape
double-sided tape
butyl sealant
butyl patty

Using butyl flashing tape is easy, especially with single or double-sided tape. Because of its flexibility and strong adhesive, it works well around windows, roofing, pipes, insulations, and on decks. A relative newcomer in the adhesives market, butyl continues to expand its uses, especially because it can be applied on many different surfaces. It is well known for its impressive elasticity and adhesion. However, because of its stickiness, it can be difficult to remove. You will likely have to make several attempts to remove butyl tape entirely. 

How To Remove Butyl Tape: A Step-By-Step Guide
To remove butyl tape, begin with the right tools. Here’s what you’ll want to have handy:
Putty knife (a plastic putty knife can also work)
Adhesive remover (see more on this below)

Water, dish soap, washrag, and dry cloth


The following four steps will guide you through the removal process:

Scrape off the butyl tape. Loosen the corner edge with a putty knife. Soak a rag in hot water with a dollop of dish soap. Put the cloth on the tape edge to help loosen the adhesive, prying more tape up as you go.


Apply the adhesive remover. Next, apply a quarter-sized drop of a commercial adhesive remover product on a soft cloth. Rub the remover onto any remaining adhesive and allow it to soak for five minutes or as directed by the manufacturer.

  

Remove leftover pieces of tape. Use the water-damp rag to remove the adhesive still in place.


Clean the surface. Repeat the process until the adhesive is removed.


If you have any questions on any of our products or services, one of our branded packaging advisors is standing by to assist. Want to know more about custom packaging options? Please call us at 020-3482-0056 or contact us via email yongjin@gzyjjd.com

YONG JIN PACKAGING MATERIALS CO.,LTD. 2022 All rights reserved ICP备案号:粤ICP备2022129228号